Page 76 -

Page 76 Jenway Catalogue
67 Series Accessories
The 67 series spectrophotometers are very versatile and flexible
instrumentswithanextensive rangeof accessories availablewhich
have been specifically designed to be easily interchangeable. All
three models are fitted with a single 10x10mm cuvette holder as
standard therefore the required accessories must be purchased
separately.
The active accessories include an 8-cell automatic turret, 6-cell
water heated automatic turret, sipper pump, Peltier and
combined sipper/Peltier and are supplied in a sample chamber
which can be easily fitted into place without the requirement of
any tools. When the active accessories are fitted the instrument
automatically detects which accessory has been fitted when
performing its warm up checks.
The passive accessories include an adjustable path length cuvette
holder for cuvettes with a variable path length between 10 and
100mm, a micro-cuvette holder for small sample volumes and
a test tube holder. There is also a single water heated cuvette
holder for temperature control. Please note that a water bath
and circulator are required for this accessory but not supplied.
The Peltier controlled cuvette holder allows precise control of
sample temperature in the range of 20 to 50°C to a resolution of
0.1°C. Part code: 660 301
A programmable sipper pump can also be fitted, enabling
controlled sample volumes to be injected into micro and standard
flow-through cuvettes. Air segmentation and rinse cycles can also
be programmed for sensitive applications. Part code: 660 201
For sensitive applications a combined Peltier sipper module is
also available. This accessory incorporates the the features and
functions of both the Peltier and sipper pump. Part code 660 701
The automated eight and six-position cell holder accessories
are the key to improved productivity in all modes of operation.
Both accept standard 10mm path-length cuvettes while the six-
position accessory has the added benefit of a water jacket for
sample temperature control via an external circulating water
bath. Part code 660 501. When using the eight position cell
holder the dedicated automated option enables up to 7 samples
to be measured sequentially with all results saved or printed
automatically. Part code 660 401
Peltier Controlled Cuvette Holder
Programmable Sipper Pump
Peltier Sipper Pump
Six and Eight Position Cell Holders
67 Series
Part code: 630 204 (Fitted as standard)
67 Series
Part code: 660 201, 660 401
(Sold separately)