Page 58 -

Page 58 Stuart® Catalogue
Incubator,
SI60
• Full visibility of samples
• Easy access to working chamber
• Many applications:
- Plant propagation
- Humidity tests
- Simulation of tropical conditions
- Incubation of complete instruments
- Corrosion testing
• Choice of analogue or digital control
Key Features
Constructed from clear Acrylic® polymer to give total visibility of
samples at all times.
Designed for easy access with hinged front door panel. Each side
panel has 2 x 10mm diameter plugged holes for the introduction
of either gases or cables. The incubator does not have a base so
that it can be placed directly over complete instruments (base is
available as an accessory). Forced air circulation and electronic
temperature control ensure accurately maintained conditions.
For analogue model SI60, setting the temperature is via a
calibrated knob. For digital model SI60D, setting the temperature
is more accurately achieved via the LCD display. The latter also
gives a constant reading of actual temperature. Both models have
a push switch pre-set at 37ºC. Additionally there is a temperature
safety cut-out set at 72ºC.
The incubator is supplied flat packed, for assembly at point of
use. Assembly is simple and requires only a screwdriver.
Technical Specification
Temperature range Ambient +5ºC to 60ºC
Temperature fluctuation at 37ºC ±0.1ºC
Temp. variation between shelves ±0.3ºC
Nominal volume 60 litres
Internal dimensions, mm (w x d x h) 450 x 380 x 380
Overall dimensions, mm (w x d x h) 600 x 390 x 390
Net weight, kg 11.2
Electrical supply 230V, 50Hz, 350W
IP Rating 30
Model Description
SI60 Incubator, total visibility, analogue
SI60D Incubator, total visibility, digital
SI60/1 Acrylic® base plate
SI60/2 Plastic coated shelf/rack system with two shelves
Ordering Information
SI60
SI60D